Uranochip Microchip Scanner
Identification
Uranochip Microchip Scanner
15 and 10-digit microchip identification scanner. Rechargeable and easy to use.
In compliance with ISO 11784 and ISO 11785.
Includes: scanner, USB cable and user guide.
Characteristics
- Easy to use - single button
- Rechargeable via a USB port
- Ergonomically designed
- Stores last 2000 scanned microchips
- Effective and fast read range
- Reads all 15 and 10 digit microchips
- ISO 134KHz FDX-B 15 digit, 125KHz FDX-A 10 digit & EM4102(BME)
Information for the veterinarian
To start your Uranochip® Scanner, simply push the on/off symbol on the back panel and release. The display will show “Halo Scanner Scanning” and the scanner will emit a single beep. If no valid microchip is found within 20 seconds, then the display will show “No Tag Found” and the scanner will again emit a single beep. To start scanning again just press the symbol again. The Uranochip® Scanner will automatically switch off after 50 seconds.
The outer surface of your Uranochip® Scanner is the scanning area and when a valid microchip is found the scanner will emit a double beep and the microchip number will be shown on the display.
To review previously scanned numbers, wait until the scanner has powered down. Then press and hold the power button on the back for four seconds and then release. To scroll through the list, press the power button once to see the next number. To exit this mode, press and hold the power button for four seconds and release.
